Sand Moisture Meter | TRIME HD2®
$2,516.00 – $3,859.00
Portable handheld sand moisture meter for moisture measurement of sand and aggregates up to 1.25″. Seztec HD2® sand moisture meter. Houston, Texas.
- Description
- Benefits
- Downloads
Description
Sand Moisture Meter for Accurate Moisture Testing
Our portable handheld sand moisture meter is a perfect solution for measuring moisture content in all construction aggregates like sand, gravel, crushed stone, grit, and other fine or coarse aggregates up to 1.25″ in size.
Meet the Seztec HD2® Sand Moisture Meter
With the Seztec HD2® sand moisture meter, you can accurately measure volumetric moisture content (%) in sand and construction aggregates directly in your stockpiles, avoiding the need for lengthy kiln drying. This innovative solution allows you to perform field testing and stockpile testing with precision, ensuring optimal product quality control.
The Technology Behind Our Seztec HD2® Sand Moisture Meter
Our moisture sensors harness the power of patented TRIME® TDR technology, creating a robust measuring field that penetrates deep into a large volume of material. This results in highly accurate and repeatable moisture measurement values. With over two decades of expertise, Seztec’s handheld and online moisture probes are tailored to meet all your aggregate and fresh concrete measurement needs.
Why On-Site Sand Moisture Measurement Matters
Moisture testing the aggregates before mixing is crucial for achieving the desired water/cement ratio (w/c ratio). Traditional moisture measurement techniques like oven-drying can be time-consuming and impractical for field testing.
With the HD2® device, your QC officer or site engineer can obtain moisture readings of construction aggregates directly on-site in a matter of seconds! This eliminates the need for lengthy kiln drying and allows for efficient field testing and stockpile testing. The meter measures three critical parameters: volumetric moisture (%), temperature, and conductivity, providing you with real-time data for immediate decision-making.
Applications of our HD2® Sand Moisture Meter Across Industries
The Seztec HD2® Sand Moisture Meter is versatile and finds applications in various industries, including:
- In-situ moisture measurement of construction aggregates (sand, washed concrete sand, grit, crushed stone, gravel up to 1-1/4″).
- Concrete and asphalt production.
- Ready-mix and pre-cast industry.
- On-site product testing.
- Suitable for highly conductive materials like Soil, Clay, Foundry Sand, Ore, Slag, and Coal (using SONO M1C probe).
About this Product
- FREE lifetime product support included.
- FREE product training.
- Accurate moisture measurement within two seconds.
- View individual and running average value.
- User friendly and easy to use.
- Replaceable probe rods and detachable cables.
- Die cast aluminium body for long service life.
- Select from 15 factory-calibrated materials, calibrated based on sand density and stone size, for quick selection.
- Take hundreds of measurements with a fully charged battery.
Delivery Scope
- HD2 Handheld Device.
- SONO-M1 Moisture Probe.
- Charger, Product Manual.
- Carrying Case.
Take control of your sand moisture measurement directly on-site with the Seztec HD2® Portable Sand Moisture Sensor. Precision, efficiency, and reliability—experience it all during your field testing and stockpile testing operations today. For detailed information about our range of sand and aggregate moisture probes, please review our complete product guide.
Compare HD2® Aggregate Moisture Meter to Competitors
| Feature | Seztec's HD2® SONO-M1® | Aggrameter® T-T-100 |
|---|---|---|
| Measurement Technology | TRIME® TDR technology (Time Domain Reflectometry) | Microwave Sensor with Microprocessor |
| Moisture Measurement Range | 0-40% | 0-20% |
| Measured Parameters | Moisture, Temperature, Electrical Conductivity (Salinity) | Moisture |
| Frequency Range | 1 GHz (Higher frequency offers superior accuracy, sensitivity, and resolution) | 50 MHz |
| Probe Prong Length | Standard: 130mm Optional: 200mm (replaceable coated rods for deeper penetration) | 77 mm (three inches) |
| Material Calibrations | 15 factory calibrated materials stored. Ready to use right out of the box. (sand, gravel, crushed stone, grit, mixed aggreagtes) User-defined materials possible | Up to 10 material types |
| Maximum Aggregate Particle Size | Up to 1-1/4" | 3/8" (or 9.5 mm) |
| Display Body | Sturdy Die-Cast Aluminum IP67 | Non-Metallic/ Plastic Enclosure |
| Power | Chargeable Battery (up to 1500 measurements in one cycle) | AA Batteries |
| Display Resolution | Large Multi-line Alphanumeric LCD Screen | 2 x 16 Characters |
| Measurement Mode | Measure a sample in 5-gallon bucket or directly in your stockpiles |
**Disclaimer:
The information provided on this page about competitor products is gathered from openly available sources on the internet. We strive to ensure accuracy; however, we cannot guarantee that all the information is current or free from errors. Customers are encouraged to conduct their own research and verify details before making any decisions based on this information.
- Manufactured in Germany, our device is built to last and thrive in demanding environments.
- With a powerful battery, you can conduct hundreds of measurements without worrying about frequent recharging.
- Effortlessly operate it with one hand using the intuitive four-button interface.
- Count on high reliability, even in challenging conditions, thanks to its superior radar technology.
- Accurately measure water content up to material saturation levels.
- Get your measuring value displayed within a mere two seconds, saving you valuable time.
- Its robust and watertight structure ensures durability and reliability, no matter the conditions.
- Receive your device in a resilient hard shell case, ensuring safe storage and transportation.
